Steel Mills

  • Accumulator and Loop Tower

    A 925 Linear Cable Reel Sensor can easily be retrofitted to the accumulator/loop tower to monitor the movement of the roll carriage.

    Keep Reading
  • Continuous Casting

    We have air-cooled resolver or Linear Displacement Transducer (LDT) systems to take control of your torch cut-off operation.

    Keep Reading
  • Electric Arc Furnace Cover

    A 950MD Mill Duty Housing with a 952 BlueOx LDT was mounted along side the hydraulic cylinders that rotate and move the cover vertically.

    Keep Reading
  • Monitor Torch Cut-Off Heads

    In order to close the loop on torch cut-off heads, a position sensing device is required. The Gemco 953 LDT and 950MD with vortex air cooling is effective.

    Keep Reading
  • Raw Material to Iron

    Reduced Down-Time. Special engineered replacement sensor operates 10 times longer than OEM supplied sensor package.

    Keep Reading
  • Rolling

    More Efficient Burns - Accurate EAF Electrode Positioning and Movement Maximizes Charge Bum and Eliminates Electrode Crash.

    Keep Reading
  • Rolling Mill

    The 953 VMax LDT, with the protection of the 950MD Mill-Duty Housing, is ideally suited for these hot, wet, and high shock applications.

    Keep Reading
  • Rolling Mill Side Guide Position

    Gemco dual resolvers as well as geared single turn resolvers have been successfully applied in these applications. The resolvers are the preferred method due to the shock, temperature and lubrication seen near the mounting point.

    Keep Reading
  • Steel Making

    Faster Automation - Side guide automation saves setup time and improves accuracy

    Keep Reading
  • Turret Rotate and Lift

    Gemco’s 950MD Mill Duty Housing and 952 BlueOx LDT were used to monitor the turret lift and a 1986 resolver was used to monitor the turret rotation.

    Keep Reading
  • Walking Beams

    A rod style LDT in a 950MD Mill-Duty Housing is installed parallel to the hydraulic cylinder. The LDT monitors the position of each cylinder and reports it directly to the host controls.

    Keep Reading